Re/Programming, Configuration
Configuration includes the following functions.
|
Function |
Description |
|
|
Read/Write Configuration |
Before replacing ECU |
Allows the reading of vehicle specification (Type ID) written in Chassis Control Module to store the specification in CONSULT. |
|
After replacing ECU |
Allows the writing of vehicle information (Type ID) stored in CONSULT into the Chassis Control Module. |
|
|
Manual Configuration |
Allows the writing of vehicle specification (Type ID) into the Chassis Control Module by hand. |
|
CAUTION:
Use "Manual Configuration" only when "TYPE ID" of Chassis Control Module cannot be read.