LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2019 >> QX50 Essential, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Chassis Control >> System Description >> Diagnosis System (Chassis Control Module) >> CONSULT Function >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Item

[Unit]

Description

IGN VOLT

[V]

Displays the ignition power supply voltage.

CONTROL MODULE MALF

[Off / On]

Displays the chassis control module malfunction.

CAN DIAG STATUS

[Off / On]

Displays CAN network diagnosis status.

VEHICLE SPEED

[mph or km/h]

Displays the vehicle speed.

FR WHEEL SPEED

[rpm]

Displays the rotational speed of front RH tire.

FL WHEEL SPEED

[rpm]

Displays the rotational speed of front LH tire.

RR WHEEL SPEED

[rpm]

Displays the rotational speed of rear RH tire.

RL WHEEL SPEED

[rpm]

Displays the rotational speed of rear LH tire.

STEERING ANG SENSOR

[deg]

Displays the steering angle from the steering angle sensor.

DECEL G SENSOR

[G]

Displays the decel G.

SIDE G SENSOR

[G]

Displays the side G.

YAW RATE SENSOR

[deg/s]

Displays the yaw rate.

ACCELE PEDAL POSITION

[%]

Displays the accelerator pedal position.

THROTTLE CONTROL

[NORMAL / INCORR / PREV / INPOSSI]

Displays the electric throttle status.

SHIFT POSITION

--

Displayed but not used.

STOP LAMP SW

[ACT / INACT]

Displays the stop lamp switch status.

PRESS SENSOR

[bar]

Displays the brake fluid pressure.

ABS

[NORMAL / ABNOR]

Displays the ABS function status.

ABS MALF

[NORMAL / ABNOR]

Displays the ABS function status.

EBD

[NORMAL / ABNOR]

Displays the EBD function status.

TCS

[NORMAL / ABNOR]

Displays the TCS function status.

TCS MALF

[NORMAL / ABNOR]

Displays the TCS function status.

VDC

[NORMAL / ABNOR]

Displays the VDC function status.

VDC MALF

[NORMAL / ABNOR]

Displays the VDC function status.

VDC OFF SWITCH

[Off / On]

Displays VDC OFF switch status.

ESS relay active request

--

Displayed but not used

DRIVE MODE SELECTOR

[STD / SPORT / SNOW / ECO / SPORT+ / PERSO / NOT / NOT SET]

Displays the drive mode select switch selection status.

LOG-IN PERMIS

[NO PER / PERMIS]

Displays the login authority status of Infiniti InTuition function.

I-KEY LINK

[Off / On]

Displays the Intelligent Key linking status of Infiniti InTuition function.

USER

[USER A / USER B / USER C / GUEST]

Displays the current user status of Infiniti InTuition function.

ENGINE/TM SETTING

[SPOT / STD / ECO / SNOW]

Displays the engine/transmission setting status with Infiniti drive mode selector function.

STRG SETTING

[STD / SPT / TOUR / SPT-L]

Displays the steering setting characteristic.

ALC SETTING

[Off / LOW/ HIGH]

Displays the active lane control setting status characteristic.

ATC SETTING

[Off /On]

Displays the active trace control setting status characteristic.

COMBI METER

[STD / SPORT / SNOW / ECO / PERSO]

Displays the combination meter function setting characteristic.

Active engine brake

[Off / On]

Displays the active engine brake (brake control) function operation status.

ATC 1

[Off / On]

Displays the active trace control function operation status.

ATC 2

[Off / On]

Displays the active trace control function operation status.

ATC 4

[Off / On]

Displays the active trace control function operation status.

ATC 3

[Off / On]

Displays the active trace control function operation status.

ATC 5

[Off / On]

Displays the active trace control function operation status.

ARC BRAKE

[Off / On]

Displays the active ride control (brake control) function operation status.

FL TIRE DISP

[DEF / 1]

Displays the status of front LH tire displayed on the information display in the combination meter.

FR TIRE DISP

[DEF / 1]

Displays the status of front RH tire displayed on the information display in the combination meter.

RL TIRE DISP

[DEF / 1]

Displays the status of rear LH tire displayed on the information display in the combination meter.

RR TIRE DISP

[DEF / 1]

Displays the status of rear RH tire displayed on the information display in the combination meter.

VEHICLE DISP

[DEF / 1]

Displays the operating status of active ride control (brake control) function displayed on the information display in the combination meter.

INTERRUPT DISP

[NO REQ / HOLD 1 / HOLD 2 / HDC]

Displays the interruption status on the information display in the combination meter.

TURN DISP

[N STEER / LEFT / RIGHT]

Displays the turning direction of active trace control function and active engine brake function on the information display in the combination meter.

BRAKE HOLD DISP

[ACT / INACT / RELEA]

Displays the operating status of hill start assist function displayed on the information display in the combination meter.

ATC DISP

[Off / On]

Displays the operating status of active trace control function displayed on the information display in the combination meter.

ARC BRAKE DISP

[Off / On]

Displays the operating status of active ride control (brake control) function displayed on the information display in the combination meter.

AEB CVT PERMIT

[Off / On]

Displays the transaxle authorized state for active engine brake function.

AEB STATUS

[Off / On]

Displays the setting status of active engine brake function.

AEB COMMAND 1

[G]

Displays the relative command value of active engine brake function.

AEB COMMAND 2

[G]

Displays the relative command value of active engine brake function.

AEB SLIP RATE

[%]

Displays the slip ratio of active engine brake function is operating.

Buckle SW

Off / On

Displays the seat belt buckle switch (driver side) status.

VDC (ABH active)

Possible / Impossi

Displays the automatic brake hold active status at ABS actuator and electric unit (control unit).

ABH (CCM)

Off / On

Displays the brake hold status at automatic brake hold.

Slope

Slow / Steep

Displays the slope status.

PB active request (VDC)

REQ / NO REQ

Displays the parking brake active request status to electric parking brake control module from ABS actuator and electric unit (control unit).

CCM (VDC)

Normal / Ab normal

Displays the chassis control module status detected by ABS actuator and electric unit (control unit).

PB active request (CCM)

REQ / NO REQ

Displays the parking brake active request status to electric parking brake control module from chassis control module.

PB SW

Off / Release

Displayed the parking brake switch status.

ABH active request (CCM)

REQ / NO REQ

Displays the automatic brake hold active request status to ABS actuator and electric unit (control unit) from chassis control module. (When Vehicle stopped by driver's brake)

ABH malfunction

Normal / Ab normal

Displays the automatic brake hold status.

ABH indicator lamp

Off / On

Displays the automatic brake hold indicator lamp status.

ABH active request (ADAS) 1

--

Not used

PB

RLS 1 / RLS 2 / APP 1 / APP 2

Displays the electric parking brake status.

CCM (PB)

Normal / Ab normal

Displays the chassis control module status detected by electric parking brake control module.

PB (ABH active)

Possible / Impossi

Displays the automatic brake hold active status at electric parking brake control module.

PB malfunction status

Normal / ABN 1 / ABN 2 / Not used

Displays the electric parking brake status.

ABH active request (ADAS) 2

--

Not used

ABH active request (ADAS) 3

--

Not used

ADAS

--

Not used

ABH (ADAS)

--

Not used

ABH SW

Off / On

Displays the automatic brake hold switch status.

ABH SW indicator lamp

Off / On

Displays the automatic brake hold switch indicator status.

ABH active judge (CCM)

OK / NG

Displays the judgement of automatic brake hold active states.

Master warning

--

Displayed but not used

Angle command value

--

Displayed but not used

Control gain3

--

Displayed but not used

Angle control request

--

Displayed but not used

Angle request mode

--

Displayed but not used

Motor angle

--

Displayed but not used

Mode status

--

Displayed but not used

Reaction control status

--

Displayed but not used

Vehicle speed

--

Displayed but not used

Initialize complete flag

--

Displayed but not used

Pilot drive control status

--

Displayed but not used

CAN fail judge permission

--

Displayed but not used

Control status number

--

Displayed but not used

Steering angle command value

--

Displayed but not used

Steering reaction force cmnd

--

Displayed but not used

Offset command value

--

Displayed but not used

Control request flag

--

Displayed but not used