Individual Function Within The System
|
Shift selector position |
Operation/Function |
|
|
H (Home position) |
The selector lever automatically moves back to the home position after it is operated. |
|
|
P (P position switch |
Completely stop the vehicle and press the P position switch while depressing the brake pedal. The shift position changes to P. |
|
|
R |
While depressing the brake pedal, press the selector knob button and shift the selector lever to R position. The shift position changes to R. |
|
|
Nr |
When shift position is D or M, while depressing the brake pedal, shift the selector lever to the Nr position and hold it for approx. 0.5 second. The shift position changes to N.
NOTE:
Even if selector lever is shifted to the Nr position when shift position is R, the shift position does not change to N and the shift position warning buzzer sounds.
|
|
|
Nd |
When shift position is R, while depressing the brake pedal, shift the selector lever to the Nd position and hold it for approx. 0.5 second. The shift position changes to N.
NOTE:
Even if selector lever is shifted to the Nd position when shift position is D or M, the shift position does not change to N and the shift position warning buzzer sounds.
|
|
|
D/M |
|
|
: Hold
: Current shift position
: Be able to shift here
|
POWER SW |
Operation |
Vehicle speed |
Stop lamp switch |
Shift position |
Remarks |
||||
|
P |
R |
N |
D |
M |
|||||
|
OFF/ACC |
Selector lever |
-- |
-- |
|
-- |
-- |
|||
|
P position SW |
-- |
-- |
|
-- |
-- |
||||
|
ON (Engine stop) |
Selector lever |
-- |
ON |
|
-- |
|
-- |
-- |
|
|
-- |
OFF |
|
-- |
Shift position warning buzzer: Two short beeps |
|||||
|
P position SW |
-- |
-- |
|
-- |
|
-- |
-- |
-- |
|
|
ON (Engine running) |
Selector lever |
-- |
ON |
|
|
|
|
|
-- |
|
-- |
OFF |
|
-- |
Shift position warning buzzer: Two short beeps |
|||||
|
P position SW |
5 km/h (3 MPH) or less |
-- |
|
|
|
|
|
-- |
|
|
5 km/h (3 MPH) or more |
-- |
-- |
|
|
|
|
Shift position warning buzzer: Two short beeps |
||
*: Direct shifting to the M position (manual mode) from the P position is not possible.