Component Inspection (Intake Air Temperature Sensor 1)
- CHECK INTAKE AIR TEMPERATURE (IAT) SENSOR 1
- Turn ignition switch OFF.
- Disconnect mass air flow (MAF) sensor harness connector.
- Check resistance between mass air flow sensor terminals as per the following.
Mass air flow sensor
Condition
Resistance (k©)
+
-
Terminals
3
4
Temperature [ deg.C (deg.F)]
25 (77)
1.800 - 2.200
Is the inspection result normal?
YES
INSPECTION END
NO
Replace MAF sensor (IAT sensor 1 is built-in). Refer to Exploded View .