Values On The Diagnosis Tool
- The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
- Numerical values in the following table are reference values.
- These values are input/output values that ATR control module receives/transmits and may differ from actual operations.
- For outlines of following items, refer to CONSULT Function .
|
Monitor Item |
Condition |
Values/Status |
|
|
ODO/TRIP METER |
Ignition switch : ON Compare CONSULT value with the meter indication. |
Almost the same ODO/TRIP as the meter indication is displayed. |
|
|
IGN voltage |
Ignition switch : ON |
Battery voltage |
|
|
ACC sensor voltage |
Ignition switch : ON |
The voltage (V) detected by G sensor is displayed. Voltage 0~5V Offset 2.35V, Sine wave of frequency 30-240Hz 0.15V/1G |
|
|
ENGINE RPM |
Start the engine and compare CONSULT value with the meter indication. |
Almost the same engine speed as the meter indication is displayed. |
|
|
Actuator current |
Ignition switch : ON |
0 A |
|
|
Board degC |
Ignition switch : ON |
The board temperature of ATR control module is displayed. |
|
|
Error code |
Ignition switch : ON |
Normal condition : 0 When error is detected : Internal code is other than 0 |
|