LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2019 >> QX50 Pure, 4WD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System - Direct Adaptive Steering >> Removal And Installation >> Steering Angle Sub Control Module >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

  1. Remove front bumper. Refer to Removal and Installation .
  2. Remove passenger side fender protector. Refer to Removal and Installation .
  3. Disconnect steering angle sub control module connectors. Refer to Exploded View .
  4. Remove the bolts of steering angle sub control module. Refer to Exploded View .
  5. Remove the steering angle sub control module.
    CAUTION: When replacing control module, replace the following control modules as a set:
    • Steering force control module
    • Steering angle main control module
    • Steering angle sub control module
scientia non olet · About LEMON Manuals