Component Inspection (Fuel Rail Pressure Sensor)

With CONSULT

1. Turn ignition switch OFF.
2. Reconnect harness connector disconnected.
3. Start engine.
4. On CONSULT screen, select "ENGINE">>"Data Monitor".
5. Check that the "FUEL PRES SEN V" indication.

   Monitor Item	Condition	Values/Status
   FUEL PRES SEN V	Engine speed: Idle	1.120 - 1.310 V
   	Engine speed: Revving engine from idle to 4, 000 rpm quickly	1.120 - 2.900 V

Without CONSULT

1. Turn ignition switch OFF.
2. Reconnect harness connector disconnected.
3. Start the engine.
4. Check FRP sensor signal voltage.

Is the inspection result normal?

YES

INSPECTION END

NO

Replace FRP sensor. Refer to Exploded View .