Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CONTINUITY COMMUNICATION SIGNAL CIRCUIT

Turn ignition switch OFF.
Disconnect around view monitor control unit connector and front camera connector.

Check continuity between around view monitor control unit harness connector and front camera harness connector.

Around view monitor control unit		Front camera		Continuity
Connector	Terminal	Connector	Terminal	Continuity
M61	67	E50	6	Existed

Check continuity between around view monitor control unit harness connector and ground.

Around view monitor control unit		Ground	Continuity
Connector	Terminal
M61	67		Not existed

Is inspection result normal?

YES

GO TO 2.

Repair harness or connector.

CHECK COMMUNICATION SIGNAL

Connect around view monitor control unit connector and front camera connector.
Turn ignition switch ON.

Check signal between around view monitor control unit harness connector and ground.

(+)		(-)	Condition	Reference value
Around view monitor control unit
Connector	Terminal
M61	67	Ground	"CAMERA" switch is ON or shift position is "R".	Courtesy of NISSAN NORTH AMERICA, INC.

Is inspection result normal?

YES

Replace around view monitor control unit. Refer to Removal and Installation .

Replace front camera. Refer to Removal and Installation .