Diagnosis Procedure

WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

CHECK RETRACT MOTOR OPERATION SIGNAL CIRCUIT [BETWEEN AROUND VIEW MONITOR CONTROL UNIT AND DOOR MIRROR (PASSENGER SIDE)]

Turn ignition switch OFF.
Disconnect around view monitor control unit connector and door mirror (passenger side) connector.

Check whether or not continuity between around view monitor control unit harness connector and door mirror (passenger side) harness connector is normal.

Around view monitor control unit		Door mirror (passenger side)		Continuity
Connector	Terminal	Connector	Terminal	Existed
M48	30	D23	8
	32		9

Check whether or not continuity between around view monitor control unit harness connector and ground is normal.

Around view monitor control unit		Ground	Continuity
Connector	Terminal		Not existed
M48	30
	32

Is the check result normal?

YES

Perform diagnosis of door mirror (passenger side) retract motor operation signal circuit. Refer to Wiring Diagram (WITH AUTOMATIC DRIVE POSITIONER), Wiring Diagram (WITHOUT AUTOMATIC DRIVE POSITIONER).

Repair the harnesses or connectors.