Diagnosis Procedure
WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONTINUITY COMMUNICATION SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect around view monitor control unit connector and door mirror (passenger side) connector.
- Check continuity between around view monitor control unit harness connector and door mirror (passenger side) harness connector.
Around view monitor control unit
Door mirror
(passenger side)
Continuity
Connector
Terminal
Connector
Terminal
M61
61
D23
3
Existed
- Check continuity between around view monitor control unit harness connector and ground.
Around view monitor control unit
Ground
Continuity
Connector
Terminal
M61
61
Not existed
Is inspection result normal?
YES
GO TO 2.
NO
Repair harness or connector.
- CHECK COMMUNICATION SIGNAL
- Connect around view monitor control unit connector and door mirror (passenger side) connector.
- Turn ignition switch ON.
- Check signal between around view monitor control unit harness connector and ground.
(+)
(-)
Condition
Reference value
Around view monitor control unit
Connector
Terminal
M61
61
Ground
"CAMERA" switch is ON or shift position is "R".
Is inspection result normal?
YES
Replace around view monitor control unit. Refer to Removal and Installation .
NO
Replace side camera RH. Refer to Removal and Installation .