VVEL Control Shaft Position Sensor Adjustment: Description
WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
VVEL control shaft position sensor adjustment is an operation to adjust the initial position of the VVEL control shaft position sensor. (For details, refer to Work Procedure .)
It must be performed each time VVEL ladder assembly is replaced.
CAUTION:
- It must be performed only on the replaced bank side.
- It must not be performed except when VVEL ladder assembly is replaced. If by any chance the adjustment is performed, replace VVEL ladder assembly.