Data Monitor

WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor Item [Unit]	MAIN SIGNALS	Description
RAD FAN REQ [1/2/3/4]	x	Displays the value of the cooling fan speed request signal received from ECM via CAN communication.
AC COMP REQ [Off/On]	x	Displays the status of the A/C compressor request signal received from ECM via CAN communication.
TAIL&CLR REQ [Off/On]	x	Displays the status of the position light request signal received from BCM via CAN communication.
HL LO REQ [Off/On]	x	Displays the status of the low beam request signal received from BCM via CAN communication.
HL HI REQ [Off/On]	x	Displays the status of the high beam request signal received from BCM via CAN communication.
FR FOG REQ [Off/On]	x	Displays the status of the front fog light request signal received from BCM via CAN communication.
FR WIP REQ [Stop/1LOW/Low/Hi]	x	Displays the status of the front wiper request signal received from BCM via CAN communication.
WIP AUTO STOP [STOP P/ACT P]	x	Displays the status of the front wiper auto stop signal judged by IPDM E/R.
WIP PROT [Off/BLOCK]	x	Displays the status of the front wiper fail-safe operation judged by IPDM E/R.
IGN RLY1 -REQ [Off/On]	Displays the status of the ignition switch ON signal received from BCM via CAN communication.
IGN RLY [Off/On]	x	Displays the status of the ignition relay judged by IPDM E/R.
PUSH SW [Off/On]	Displays the status of the push-button ignition switch judged by IPDM E/R.
INTER/NP SW [Off/On]	Displays the status of the shift position judged by IPDM E/R.
ST RLY CONT [Off/On]	Displays the status of the starter relay status signal received from BCM via CAN communication.
IHBT RLY -REQ [Off/On]	Displays the status of the starter control relay signal received from BCM via CAN communication.
ST/INHI RLY [Off/ ST ON/INHI ON/UNKWN]	Displays the status of the starter relay and starter control relay judged by IPDM E/R.
DETENT SW [Off/On]	Displays the status of the A/T shift selector (detention switch) judged by IPDM E/R.
S/L RLY -REQ [Off/On]	NOTE: The item is indicated, but not monitored.
S/L STATE [LOCK/UNLK/UNKWN]	NOTE: The item is indicated, but not monitored.
DTRL REQ [Off/On]	Displays the status of the day time running light request signal received from BCM via CAN communication
OIL P SW [Open/Close]	NOTE: The item is indicated, but not monitored.
HOOD SW [Off/On]	Displays the status of the hood switch 1 judged by IPDM E/R.
HL WASHER REQ [Off/On]	NOTE: The item is indicated, but not monitored.
THFT HRN REQ [Off/On]	Displays the status of the theft warning horn request signal received from BCM via CAN communication.
HORN CHIRP [Off/On]	Displays the status of the horn reminder signal received from BCM via CAN communication.
HOOD SW 2 [Off/On]	Displays the status of the hood switch 2 judged by IPDM E/R.