Data Monitor
|
Monitor Item |
Condition |
|
REQ SW -DR |
Indicates [On/Off] condition of door request switch (driver side) |
|
REQ SW -AS |
Indicates [On/Off] condition of door request switch (passenger side) |
|
REQ SW -BD/TR |
Indicates [On/Off] condition of back door request switch |
|
PUSH SW |
Indicates [On/Off] condition of push-button ignition switch |
|
CLUTCH SW |
NOTE:
This item is displayed, but cannot be monitored
|
|
BRAKE SW 1 |
Indicates [On/Off] *1 condition of stop lamp switch power supply |
|
BRAKE SW 2 |
Indicates [On/Off] condition of stop lamp switch |
|
DETE/CANCL SW |
Indicates [On/Off] condition of P position |
|
SFT PN/N SW |
Indicates [On/Off] condition of P or N position |
|
UNLK SEN -DR |
Indicates [On/Off] condition of driver door UNLOCK status |
|
PUSH SW -IPDM |
Indicates [On/Off] condition of push-button ignition switch |
|
IGN RLY1 -F/B |
Indicates [On/Off] condition of ignition relay 1 |
|
DETE SW -IPDM |
Indicates [On/Off] condition of P position |
|
SFT PN -IPDM |
Indicates [On/Off] condition of P or N position |
|
SFT P -MET |
Indicates [On/Off] condition of P position |
|
SFT N -MET |
Indicates [On/Off] condition of N position |
|
ENGINE STATE |
Indicates [Stop/Stall/Crank/Run] condition of engine states |
|
VEH SPEED 1 |
Display the vehicle speed signal received from combination meter by numerical value [Km/h] |
|
VEH SPEED 2 |
Display the vehicle speed signal received from ABS or VDC or TCM by numerical value [Km/h] |
|
DOOR STAT-DR |
Indicates [LOCK/READY/UNLK] condition of driver side door status |
|
DOOR STAT-AS |
Indicates [LOCK/READY/UNLK] condition of passenger side door status |
|
ID OK FLAG |
Indicates [Set/Reset] condition of key ID |
|
PRMT ENG STRT |
Indicates [Set/Reset] condition of engine start possibility |
|
PRMT RKE STRT |
NOTE:
This item is displayed, but cannot be monitored
|
|
TRNK/HAT MNTR |
NOTE:
This item is displayed, but cannot be monitored
|
|
RKE-LOCK |
Indicates [On/Off] condition of LOCK signal from Intelligent Key |
|
RKE-UNLOCK |
Indicates [On/Off] condition of UNLOCK signal from Intelligent Key |
|
RKE-TR/BD |
NOTE:
This item is displayed, but cannot be monitored
|
|
RKE-PANIC |
Indicates [On/Off] condition of PANIC button of Intelligent Key |
|
RKE-MODE CHG |
Indicates [On/Off] condition of MODE CHANGE signal from Intelligent Key |
|
RKE OPE COUN1 |
When remote keyless entry receiver receives the signal transmitted while operating on Intelligent Key, the numerical value start changing |
|
RKE OPE COUN2 |
NOTE:
This item is displayed, but cannot be monitored
|
|
SHFTLCK SLNID PWR SPLY* 2 |
Indicates [On/Off] condition of shift lock solenoid |
*1 : OFF is displayed when brake pedal is depressed while brake switch power supply is OFF.
*2 : This item is displayed only for vehicle with remote engine start function.