Component Inspection
- CHECK FUEL PUMP
- Turn ignition switch OFF.
- Disconnect "fuel level sensor unit and fuel pump" harness connector.
- Check resistance between "fuel level sensor unit and fuel pump" terminals as follows.
Fuel pump
Condition
Resistance
Terminal
5
6
Temperature [Deg. C (Deg. F)]
25 (77)
0.2 - 5.0 Ohm
Is the inspection result normal?
YES
INSPECTION END
NO
Replace fuel filter and fuel pump assembly. Refer to FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY : Removal & Installation .