Component Inspection
- CHECK ACCELERATOR PEDAL POSITION SENSOR
- Turn ignition switch OFF.
- Reconnect all harness connectors disconnected.
- Turn ignition switch ON.
- Check the voltage ECM harness connector terminals as per the following.
ECM
Condition
Voltage
Connector
+
-
Terminal
E152
202
(APP sensor 1)
203
Accelerator pedal
Fully released
0.45 - 1.0 V
Fully depressed
4.4 - 4.8 V
195
(APP sensor 2)
196
Fully released
0.22 - 0.50 V
Fully depressed
2.1 - 2.5 V
Is the inspection result normal?
YES
INSPECTION END
NO
Replace accelerator pedal assembly. Refer to ACCELERATOR CONTROL SYSTEM .