Component Function Check
- CHECK HIGH PRESSURE FUEL PUMP FUNCTION
With CONSULT
- Start engine.
- On CONSULT screen, select "ENGINE">>"Data Monitor".
- Check that the "FUEL PRES SEN V" indication.
Monitor Item
Condition
Values/Status
FUEL PRES SEN V
Engine speed: Idle
0.7 - 1.0 V
2, 000 RPM
0.6 - 1.0 V
Without CONSULT
- Start engine.
- Check the voltage between ECM harness connector terminals as per the following conditions.
ECM
Condition
Value
Connector
+
-
Terminal
F143
47
85
Engine speed: Idle
0.7 - 1.0 V
2, 000 RPM
0.6 - 1.0 V
Is the inspection result normal?
YES
INSPECTION END
NO
Refer to Diagnosis Procedure .