Component Inspection

1. Turn ignition switch OFF.
2. Disconnect turbocharger boost sensor (B1) harness connector.
3. Check resistance between turbocharger boost sensor (B1) terminals as follows.

   Turbocharger boost sensor (B1)		Condition		Resistance
   +	-
   Terminals
   3	4	Temperature [Deg. C (Deg. F)]	25 (77)	1.80 - 2.20 kOhm

Is the inspection result normal?

YES

INSPECTION END

NO

Replace turbocharger boost sensor (with intake air temperature sensor 2). Refer to CHARGE AIR COOLER : Exploded View .