Component Inspection
- CHECK FUEL PUMP CONTROL MODULE
Check the voltage between fuel pump control module terminals under the following conditions.
Fuel pump control module
Condition
Voltage
(Approx.)
Connector
+
-
Terminal
B11
1
2
For 1 second after turning ignition switch ON
9.9 V
More than 1 second after turning ignition switch ON
0 V
Idle speed
9.9 V
Is the inspection result normal?
YES
INSPECTION END
NO
Replace fuel pump control module. Refer to FUEL PUMP CONTROL MODULE (FPCM) : Removal & Installation .