Component Function Check

WARNING: This page is about a different car, the 2021 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

CONSULT

Select "PUSH SW" in "Data Monitor" of mode "BCM (INTELLIGENT KEY)".
Check the push-button ignition switch signal under the following conditions.

Test item	Condition	Status
PUSH SW	Push-button ignition switch is pressed	On
PUSH SW	Push-button ignition switch is not pressed	Off

Is the indication normal?

YES

Inspection End.

Go to Diagnosis Procedure .