DTC Confirmation Procedure

1. Start the engine.
2. Turn the MAIN switch of ICC/ProPILOT Assist system ON and wait at least 2 seconds.
3. Perform "All DTC Reading" with CONSULT.
4. Check if the "U1000-01" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".

Is "U1000-01" detected as the current malfunction?

YES

Refer to Diagnosis Procedure .

NO

To check malfunction symptom before repair: Refer to Intermittent Incident .

NO

Confirmation after repair: Inspection End.