Detail Flow
|
Order |
Input |
Output |
Control unit condition |
|
1 |
Memory switch |
-- |
The memory switch signal is inputted to the driver seat control unit when memory switch 1 or 2 is operated. Memory switch signal is inputted to automatic drive positioner control unit via UART communication. |
|
2 |
-- |
Motors (seat, steering column, door mirror) |
Driver seat control unit operates each motor of seat when it recognizes the memory switch pressed and requests each motor operation to automatic drive positioner control unit via UART communication. The automatic drive positioner control unit operates each motor. |
|
Memory switch indicator |
Driver seat control unit requests the flashing of memory indicator while either of the motors is operating. The driver seat control unit illuminates the memory indicator. |
||
|
3 |
Sensors (seat, steering column, door mirrors) |
-- |
Driver seat control unit judges the operating seat position with each seat sensor input. The positions of the steering column and outside mirrors are monitored with each sensor signal. Driver seat control unit stops the operation of each motor when each part reaches the recorded address. |
|
4 |
-- |
Memory switch indicator |
Driver seat control unit requests the illumination of memory indicator after all motors stop. The driver seat control unit illuminates the memory indicator for 5 seconds. |