Data Monitor
|
Item (Unit) |
Note |
|
Steering angle (deg) |
Displays the steering angle. |
|
Battery voltage (V) |
Displays the voltage value applied to ABS actuator and electric unit (control unit). |
|
FR LH wheel speed (km/h) |
Displays the wheel speed calculated by front LH wheel sensor. |
|
FR RH wheel speed (km/h) |
Displays the wheel speed calculated by front RH wheel sensor. |
|
RR LH wheel speed (km/h) |
Displays the wheel speed calculated by rear LH wheel sensor. |
|
RR RH wheel speed (km/h) |
Displays the wheel speed calculated by rear RH wheel sensor. |
|
Vehicle speed (km/h) |
Displays the vehicle speed. |
|
Odometer (m) |
Displays the odometer. |
|
Decel G sensor (m/s 2 ) |
Displays the decel G. |
|
Side G sensor (G) |
Displays the side G. |
|
Yaw rate sensor (deg/s) |
Displays the yaw rate. |
|
Mastewr cylinder pressure (bar) |
Displays the brake fluid pressure. |
|
Valve, pump motor (Off / On) |
Displays the valve and pump motor status. |
|
FL/RR valve (On / Off) |
Displays the front LH and rear RH valve status. |
|
FR/RL valve (On / Off) |
Displays the front RH and rear LH valve status. |
|
FL/RR pump (On / Off) |
Displays the front LH and rear RH pump motor status. |
|
FR/RL pump (On / Off) |
Displays the front RH and rear LH pump motor status. |
|
RR RH ABS OUT valve (On / Off) |
Displays the ABS OUT valve status of rear RH. |
|
RR RH AND IN valve (On / Off) |
Displays the ABS IN valve status of rear RH. |
|
RR LH ABS OUT valve (On / Off) |
Displays the ABS OUT valve status of rear LH. |
|
RR LH ABS IN valve (On / Off) |
Displays the ABS IN valve status of rear LH. |
|
FR RH ABS OUT valve (On / Off) |
Displays the ABS OUT valve status of front RH. |
|
FR RH ABS IN valve (On / Off) |
Displays the ABS IN valve status of front RH. |
|
FR LH ABS OUT valve (On / Off) |
Displays the ABS OUT valve status of front LH. |
|
FR LH ABS IN valve (On / Off) |
Displays the ABS IN valve status of front LH. |
|
Front tire diameter (mm) |
Displays the front tire diameter. |
|
Transmission type (M/T / A/T / CVT / DCT / Not) |
Displays the Transmission type. |
|
Parking brake type (1 / 2 / 3 / 4 / 5) |
Displays the parking brake type. |
|
Stop lamp (On / Off) |
Displays the Stop lamp status. |
|
AEB/IEB max torque 4 (Nm) |
Displays the maximum permissible braking torque of automatic emergency braking (MODE rate MODE). |
|
AEB/IEB max torque 3 (Nm) |
Displays the maximum permissible braking torque of automatic emergency braking (strong MODE). |
|
AEB/IEB max torque 2 (Nm) |
Displays the maximum permissible braking torque of automatic emergency braking (city MODE). |
|
AEB/IEB max torque 1 (Nm) |
Displays the maximum permissible braking torque of automatic emergency braking (pedestrian MODE). |
|
Electric parking MODE (MODE 1 / MODE 2) |
Displays the electric parking MODE. |
|
ACTUATOR VOLT (RH) (V) |
Displays the voltage value applied to the parking brake actuator (RH side). |
|
ACTUATOR VOLT (LH) (V) |
Displays the voltage value applied to the parking brake actuator (LH side). |
|
ACTUATOR CURRENT (RH) (A) |
Displays the current value applied to the parking brake actuator (RH side). |
|
ACTUATOR CURRENT (LH) (A) |
Displays the current value applied to the parking brake actuator (LH side). |
|
SLOPE RATIO (%) |
Displays the slope ratio. |
|
BR FORCE EST (RH) (KN) |
Displays the estimated braking force applied to the rear brake (RH side). |
|
BR FORCE EST (LH) (KN) |
Displays the estimated braking force applied to the rear brake (LH side). |
|
PB SW (PULL / N / PUSH / MALF) |
Displays the parking brake switch status. |
|
MALF LEVEL (NORMAL / REPAIR / STOP) |
Displays the malfunction level of electric parking brake system. |
|
BRAKE STATUS (LH) (ACT 1 / ACT 2 / ACT 3 / RLS 1 / RLS 2 / RLS 3 / RLS 4 / UNKNO / INT) |
Displays the electric parking brake system status (LH side). |
|
BRAKE STATUS (RH) (ACT 1 / ACT 2 / ACT 3 / RLS 1 / RLS 2 / RLS 3 / RLS 4 / UNKNO / INT) |
Displays the electric parking brake system status (RH side). |
|
BR DISC TEMP 1 (deg.C) |
Displays the (current) temperature of the brake disc rotor. |
|
BR DISC TEMP 2 (--) |
Displayed but not used. |
|
PB ACTIVE STATUS DISP (REL / ACT 1 / ACT 2 / UNCON) |
Displays the active status of electric parking brake system. |
|
PB MALF DISP (NORMAL / MALF 1 / MALF 2) |
Displays the malfunction status of electric parking brake system displayed on the information display in the combination meter. |
|
VEHICLE STATUS (NOT / WARN) |
Displays the vehicle status. |
|
EPB warning 1 (Warning / Off) |
Displays the information display in the combination meter displaying status. |
|
PB WARNING 1 (NO / WARN 1 / WARN 2) |
Displays the information display in the combination meter displaying status. |
|
PB WARNING 2 (NO / WARN 1 / WARN 2) |
Displays the information display in the combination meter displaying status. |
|
PB WARNING 3 (NO / WARN) |
Displays the information display in the combination meter displaying status. |
|
PB WARNING 4 (NO / WARN 1 / WARN 2) |
Displays the information display in the combination meter displaying status. |
|
PB SW indicator (On / Blink / Off) |
Displays the status of parking brake switch indicator. |
|
EPB warning 2 (Not / Warn 1 / Warn 2 / Warn 3) |
Displays the information display in the combination meter displaying status. |