Work Procedure
- REPLACE BCM
Replace BCM. Refer to Removal and Installation .
YES
GO TO 2.
- WRITING VEHICLE SPECIFICATION
Perform configuration (BCM). Refer to Description .
YES
GO TO 3.
- PAIRING OF BCM AND INTELLIGENT KEY UNIT CAUTION: Before pairing the BCM and Intelligent Key unit, always write BCM configuration. Or not doing so, BCM control functions will not operate normally.
Perform pairing the BCM and Intelligent Key unit. Press UNLOCK button of Intelligent Key.
YES
GO TO 4.
- REGISTER OF VEHICLE IDENTIFICATION NUMBER
CONSULT
- Select "VIN REGISTRATION" in "Work Support" mode of "BCM (BCM)".
- Refer to CONSULT and follow the on-screen instructions.
YES
GO TO 5
- WRITING MAC KEY CAUTION: When replacing BCM in relation with ECM replacement, replace ECM before writing MAC KEY. Refer to Description .
Perform MAC key writing. Refer to Description .
YES
GO TO 6.
- TIRE PRESSURE SENSOR ID REGISTRATION
Perform the initialization and registration of tire pressure sensor ID. Refer to Description .
YES
Work End.