Input Signal And Output Signal

Major signal transmission between each unit via communication lines is shown in the following table:

Component parts	Signal description
BCM	BCM transmits sleep wake up signal to each unit when condition is established, and then goes into each mode.
AV control unit	Transmits the sleep-ready signal to BCM via CAN communication. Receives the sleep wake up signal from BCM via CAN communication.
Chassis control module
Combination meter
Driver seat control unit
Intelligent Key unit
IPDM E/R
TCU
BOSE speaker amp. (if equipped)
ABS actuator and electric unit (control unit)
Automatic back door control unit (if equipped)
Electric shift control module
Each switch	Each switch transmits the vehicle status to BCM.