LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2022 >> QX60 Pure, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (1 Of 3) >> System Description >> Diagnosis System (ECM) >> Diagnosis Description >> CONSULT Function >> Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CONSULT Function: Function

Diagnostic test mode

CGW Status

Function

Restricted Mode

Diag Test Mode

Open Mode

Self Diagnostic Result

Display

Display

Display

Self-diagnostic results such as 1st trip DTC, DTCs and 1st trip freeze frame data or freeze frame data can be read and erased quickly. *1 Display non-network DTC which ECM memorizes.

CGW Information *2

Display *2

Display *2

Display *2

  • Display the current CGW mode *2
  • Enables CGW to switch mode *2

Data Monitor

Display

Display

Display

Input/Output data in the ECM can be read.

Work Support *2

Non-display *2

Non-display *2

Display *2

This mode enables a technician to adjust some devices faster and more accurately by following the indications on the CONSULT unit.

Active Test *2

Non-display *2

Display *2

Display *2

Diagnostic Test Mode in which CONSULT drives some actuators apart from the ECMs and also shifts some parameters in a specified range.

ECU Identification

Display

Display

Display

ECM part number can be read.

DTC Work Support

Non-display

Display

Display

SRT and operating condition to check DTC can be confirmed.

MAC Diagnosis *3

Display

Display

Display

Display MAC diagnosis result divided into the following two inspection priorities.

  • Inspection Priority 1: Root cause
  • Inspection Priority 2

CAN Diag Support Monitor *3

Display

Display

Display

NOTE: The mode is indicated, but not monitored

Network DTC *3

Display

Display

Display

Display network DTC which ECM memorizes when performing "Diagnosis (All System)".

*1: The following emission-related diagnostic information is cleared when the ECM memory is erased.

*2: In some vehicles, it is not malfunctioning in case of no display of "CGW Information". In this case, it is not necessary to switch the CGW status. In vehicles where "CGW information" is not displayed, "Work Support" and "Active Test" are always displayed.

*3: Displays when performing "Diagnosis (All System)".