Diagnosis Procedure
- CHECK ENCODER SIGNAL
- Turn ignition switch ON.
- Check signal between rear power window switch RH harness connector and ground with oscilloscope.
Signal name
(+)
(-)
Signal
(Reference value)
Rear power window switch RH
Connector
Terminal
Encoder signal 1
D43
12
Ground
Refer to following signal
Encoder signal 2
15
Is the inspection result normal?
YES
Replace rear power window switch RH. Refer to POWER WINDOW MAIN SWITCH : Removal & Installation .
NO
GO TO 2.
- CHECK ENCODER SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect rear power window switch RH connector and rear power window motor RH connector.
- Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.
Rear power window switch RH
Rear power window motor RH
Continuity
Connector
Terminal
Connector
Terminal
D43
12
D47
5
Existed
15
6
- Check continuity rear power window switch RH harness connector and ground.
Rear power window switch RH
Ground
Continuity
Connector
Terminal
D43
12
Not existed
15
Is the inspection result normal?
YES
GO TO 3.
NO
Repair or replace harness.
- CHECK ENCODER POWER SUPPLY
- Connect rear power window switch RH connector.
- Turn ignition switch ON.
- Check voltage between rear power window motor RH harness connector and ground.
(+)
(-)
Voltage (V)
(Approx.)
Rear power window motor RH
Connector
Terminal
D47
2
Ground
12
Is the inspection result normal?
YES
GO TO 5.
NO
GO TO 4.
- CHECK ENCODER POWER SUPPLY CIRCUIT
- Turn ignition switch OFF.
- Disconnect rear power window switch RH connector.
- Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.
Rear power window switch RH
Rear power window motor RH
Continuity
Connector
Terminal
Connector
Terminal
D43
4
D47
2
Existed
- Check continuity between rear power window switch RH harness connector and ground.
Rear power window switch RH
Ground
Continuity
Connector
Terminal
D43
4
Not existed
Is the inspection result normal?
YES
Replace rear power window switch RH. Refer to POWER WINDOW MAIN SWITCH : Removal & Installation .
NO
Repair or replace harness.
- CHECK GROUND CIRCUIT 1
- Turn ignition switch OFF.
- Disconnect rear power window switch RH harness connector.
- Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.
Rear power window switch RH
Rear power window motor RH
Continuity
Connector
Terminal
Connector
Terminal
D43
3
D47
4
Existed
Is the inspection result normal?
YES
GO TO 6.
NO
Repair or replace harness.
- CHECK GROUND CIRCUIT 2
- Connect rear power window switch RH connector.
- Check continuity between rear power window switch RH connector and ground.
Rear power window switch RH
Ground
Continuity
Connector
Terminal
D43
3
Existed
Is the inspection result normal?
YES
Replace rear power window motor RH. Refer to REAR REGULATOR : Removal & Installation .
NO
Replace rear power window switch RH. Refer to POWER WINDOW MAIN SWITCH : Removal & Installation .