VR30DDTT engine
- CHECK FUEL PUMP
- Turn ignition switch OFF.
- Disconnect "fuel level sensor unit and fuel pump" harness connector.
- Check resistance between "fuel level sensor unit and fuel pump" terminals as follows.
Terminals
Resistance (Ohm)
5 and 6
0.2 - 5.0 [at 25 Deg. C (77 Deg. F)]
Is the inspection result normal?
YES
INSPECTION END
NO
Replace "fuel level sensor unit and fuel pump". Refer to FUEL LEVEL SENSOR UNIT, Fuel Filter And Fuel Pump Assembly : Exploded View .