Confirmation/Adjustment Mode
- Start the diagnosis function and select "Confirmation/Adjustment". The confirmation/adjustment mode indicates where each item can be checked or adjusted.
- Select each switch on the "Confirmation/Adjustment Mode" screen to display the relevant trouble diagnosis screen. Touch the "Back" to return to the initial Confirmation/Adjustment Mode screen.
Display Diagnosis
Confirmation of the AV control unit screen operation.
Vehicle Signals
A comparison check can be made of each actual vehicle signal and the signals recognized by the system.
Navigation
The reception status of GPS can be confirmed.
Error Location Display
Results of the error occurrence are represented by the time the error occurred.
AV COMM Diagnosis
AV COMM Monitor
- Displays the communication status between AV control unit (master unit) and each unit.
- The error counter displays "OK" if any malfunction was not detected in the past and displays "0" if a malfunction is detected. It increases by 1 if the condition is normal at the next ignition switch ON cycle. The upper limit of the counter is 39.
- The error counter is erased if "Reset" is pressed.
Camera
|
Item |
Description |
|
Correct Draw Line of Rear view Camera |
The guiding lines in the rear view monitor can be adjusted. |
|
Alter/Confirm Configuration |
Displays the current configuration data. |
|
Reset Configuration |
Initializes the camera system configuration. |
Delete Unit Connection Log
Deletes error records from the AV control unit memory.
Initialize Settings
Initializes the AV control unit memory.
GPS Time Set
Date and time information can be adjusted.
Version Information
Version information of the components of the Multi AV system are displayed.
Software Update
Version of the AV control unit software can be update.
### Speaker Test
Two test tones, 100 Hz and 4 KHz, can be generated to each speaker.
Radio Tuner
Displays FM and AM monitor information.
SXM
Displays SXM monitor information.