Data Monitor
|
Item [Unit] |
Description |
|
|
IGN VOLT |
[V] |
Displays the ignition power supply voltage. |
|
CONTROL MODULE MALF |
[Off / On] |
Displays the chassis control module malfunction. |
|
CAN DIAG STATUS |
[Off / On] |
Displays CAN network diagnosis status. |
|
ESS relay active request |
[--] |
Displayed but not used. |
|
VEHICLE SPEED |
[mph or km/h] |
Displays the vehicle speed. |
|
FR WHEEL SPEED |
[rpm] |
Displays the rotational speed of front RH tire. |
|
FL WHEEL SPEED |
[rpm] |
Displays the rotational speed of front LH tire. |
|
RR WHEEL SPEED |
[rpm] |
Displays the rotational speed of rear RH tire. |
|
RL WHEEL SPEED |
[rpm] |
Displays the rotational speed of rear LH tire. |
|
STEERING ANG SENSOR |
[ deg] |
Displays the steering angle from the steering angle sensor. |
|
DECEL G SENSOR |
[G] |
Displays the decel G. |
|
SIDE G SENSOR |
[G] |
Displays the side G. |
|
YAW RATE SENSOR |
[ deg/s] |
Displays the yaw rate. |
|
THROTTLE CONTROL |
[NORMAL / INCORR / PREV / IMPOSSI] |
Displays the electric throttle status. |
|
SHIFT POSITION |
[--] |
Displays the shift position. |
|
PRESS SENSOR |
[bar] |
Displays the brake fluid pressure. |
|
ABS |
[INACT / ACTIVE] |
Displays the ABS function status. |
|
TCS |
[INACT / ACTIVE] |
Displays the TCS function status. |
|
DRIVE MODE SELECTOR |
[STD / SPORT / SNOW / ECO / SPORT+ / PERSO / NOT / NOT SET] |
Displays the drive mode select switch selection status. |
|
LOG-IN PERMIS |
[NO PER / PERMIS] |
Displays the login authority status of Infiniti InTuition function. |
|
I-KEY LINK |
[Off / On] |
Displays the Intelligent Key linking status of Infiniti InTuition function. |
|
ACCELE PEDAL POSITION |
[%] |
Displays the accelerator pedal position. |
|
STOP LAMP SW |
[INACT / ACTIVE] |
Displays the stop lamp switch status. |
|
ABS MALF |
[Off / On] |
Displays the ABS malfunction status. |
|
EBD |
[INACT / ACTIVE] |
Displays the EBD function status. |
|
TCS MALF |
[Off / On] |
Displays the TCS malfunction status. |
|
VDC |
[INACT / ACTIVE] |
Displays the VDC function status. |
|
VDC MALF |
[Off / On] |
Displays the VDC malfunction status. |
|
VDC OFF SWITCH |
[Off / On] |
Displays the VDC OFF status. |
|
ABH active judge (CCM) |
[OK / NG] |
Displays the judgement of automatic brake hold active states. |
|
USER |
[USER A / USER B / USER C / GUEST] |
Displays the current user status of Infiniti InTuition function. |
|
ENGINE/TM SETTING |
[SPORT / STD / ECO / SNOW] |
Displays the engine/transmission setting status with Infiniti drive mode selector function. |
|
STRG SETTING |
[STD / SPT / TOUR / SPT-L] |
Displays the steering setting characteristic. |
|
ALC SETTING |
[--] |
Displayed but not used |
|
ATC SETTING |
[Off /On] |
Displays the active trace control setting status characteristic. |
|
COMBI METER |
[STD / SPORT / SNOW / ECO / PERSO] |
Displays the combination meter function setting characteristic. |
|
Active engine brake |
[Off / On] |
Displays the active engine brake (brake control) function operation status. |
|
ATC 1 |
[Off / On] |
Displays the active trace control function operation status. |
|
ATC 2 |
[Off / On] |
Displays the active trace control function operation status. |
|
ATC 4 |
[Off / On] |
Displays the active trace control function operation status. |
|
ATC 3 |
[Off / On] |
Displays the active trace control function operation status. |
|
FL TIRE DISP |
[DEF / 1] |
Displays the status of front LH tire displayed on the information display in the combination meter. |
|
FR TIRE DISP |
[DEF / 1] |
Displays the status of front RH tire displayed on the information display in the combination meter. |
|
RL TIRE DISP |
[DEF / 1] |
Displays the status of rear LH tire displayed on the information display in the combination meter. |
|
RR TIRE DISP |
[DEF / 1] |
Displays the status of rear RH tire displayed on the information display in the combination meter. |
|
VEHICLE DISP |
[DEF / 1] |
Displays the operating status of active ride control (brake control) function displayed on the information display in the combination meter. |
|
INTERRUPT DISP |
[NO REQ / HOLD 1 / HOLD 2] |
Displays the interruption status on the information display in the combination meter. |
|
TURN DISP |
[N STEER / LEFT / RIGHT] |
Displays the turning direction of active trace control function and active engine brake function on the information display in the combination meter. |
|
ATC DISP |
[Off / On] |
Displays the operating status of active trace control function displayed on the information display in the combination meter. |
|
ATC 5 |
[Off / On] |
Displays the active trace control function operation status. |
|
ARC BRAKE |
[Off / On] |
Displays the active ride control (brake control) function operation status. |
|
ARC BRAKE DISP |
[Off / On] |
Displays the operating status of active ride control (brake control) function displayed on the information display in the combination meter. |
|
BRAKE HOLD DISP |
[ACT / INACT / RELEA] |
Displays the operating status of hill start assist function displayed on the information display in the combination meter. |
|
AEB CVT PERMIT |
[Off / On] |
Displays the transaxle authorized state for active engine brake function. |
|
AEB STATUS |
[Off / On] |
Displays the setting status of active engine brake function. |
|
AEB COMMAND 1 |
[G] |
Displays the relative command value of active engine brake function. |
|
AEB COMMAND 2 |
[G] |
Displays the relative command value of active engine brake function. |
|
AEB SLIP RATE |
[%] |
Displays the slip ratio of active engine brake function is operating. |
|
Buckle SW |
[Off / On] |
Displays the seat belt buckle switch (driver side) status. |
|
VDC (ABH active) |
[Possible / Impossi] |
Displays the automatic brake hold active status at ABS actuator and electric unit (control unit). |
|
ABH (CCM) |
[Off / On] |
Displays the automatic brake hold status at chassis control module. |
|
Slope |
[Slow / Steep] |
Displays the slope status. |
|
PB active request (VDC) |
[REQ / NO REQ] |
Displays the parking brake active request status to electric parking brake control module from ABS actuator and electric unit (control unit). |
|
CCM (VDC) |
[Normal / Abnormal] |
Displays the chassis control module status detected by ABS actuator and electric unit (control unit). |
|
PB active request (CCM) |
[REQ / NO REQ] |
Displays the parking brake active request status to electric parking brake control module from chassis control module. |
|
PB SW |
[Off / Release] |
Displays the parking brake switch status. |
|
ABH active request (CCM) |
[REQ / NO REQ] |
Displays the automatic brake hold active request status to ABS actuator and electric unit (control unit) from chassis control module. (When Vehicle stopped by driver's brake) |
|
ABH malfunction |
[Normal / Abnormal] |
Displays the automatic brake hold malfunction status. |
|
ABH indicator lamp |
[Off / On] |
Displays the automatic brake hold indicator lamp status. |
|
ABH active request (ADAS) 1 |
[--] |
Displayed but not used. |
|
PB |
[RLS 1 / RLS 2 / APP 1 / APP 2] |
Displays the electric parking brake status. |
|
CCM (PB) |
[Normal / Abnormal] |
Displays the chassis control module status detected by electric parking brake control module. |
|
PB (ABH active) |
[Possible / Impossi] |
Displays the automatic brake hold active status at electric parking brake control module. |
|
PB malfunction status |
[Normal / ABN 1 / ABN 2 / Not used] |
Displays the electric parking brake malfunction status. |
|
ABH active request (ADAS) 2 |
[--] |
Displayed but not used. |
|
ABH active request (ADAS) 3 |
[--] |
Displayed but not used. |
|
ADAS |
[--] |
Displayed but not used. |
|
ABH (ADAS) |
[--] |
Displayed but not used. |
|
ABH SW |
[Off / On] |
Displays the automatic brake hold switch status. |
|
ABH SW indicator lamp |
[Off / On] |
Displays the automatic brake hold switch indicator status. |
|
Angle command value |
[--] |
Displayed but not used. |
|
Control gain3 |
[--] |
Displayed but not used. |
|
Angle control request |
[--] |
Displayed but not used. |
|
Angle request mode |
[--] |
Displayed but not used. |
|
Motor angle |
[--] |
Displayed but not used. |
|
Mode status |
[--] |
Displayed but not used. |
|
Reaction control status |
[--] |
Displayed but not used. |
|
Vehicle speed |
[--] |
Displayed but not used. |
|
Initialize complete flag |
[--] |
Displayed but not used. |
|
Pilot drive control status |
[--] |
Displayed but not used. |
|
CAN fail judge permission |
[--] |
Displayed but not used. |
|
Control status number |
[--] |
Displayed but not used. |
|
Steering angle command value |
[--] |
Displayed but not used. |
|
Steering reaction force cmnd |
[--] |
Displayed but not used. |
|
Offset command value |
[--] |
Displayed but not used. |
|
Control request flag |
[--] |
Displayed but not used. |