Work Procedure

SAVING VEHICLE SPECIFICATION
CONSULT

Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to Description .

NOTE: If "READ CONFIGURATION" cannot be used, use "MANUAL CONFIGURATION" after replacing around view monitor control unit.

GO TO 2.
REPLACE AROUND VIEW MONITOR CONTROL UNIT
Replace around view monitor control unit. Refer to Removal and Installation .

GO TO 3.
WRITING VEHICLE SPECIFICATION
CONSULT Configuration

Perform "WRITE CONFIGURATION - Config file" or "MANUAL CONFIGURATION" to write vehicle specification. Refer to Work Procedure .

GO TO 4.
CALIBRATE CAMERA IMAGE
Perform calibration of camera image. Refer to Description .

Work End.