April 5, 2026: LEMON Manuals is launched! Read the announcement.

How To Set

CONSULT

Select "CLEAN SW SET" in "Work support" MODE of "HVAC".

Work support items	Display	Setting
CLEAN SW SET	MODE 1	Initial setting
	MODE 2	Setting 1
	MODE 3 (Initinal status)	Setting 2
	MODE 4	Setting 3

Setting	Setting status
Initial setting	When the auto intake switch is ON, the A/C switch is also turned ON in synchronization with the auto intake switch. Control of the auto intake switch is functional even when the A/C switch is turned OFF.
Setting 1	When the auto intake switch is ON, the A/C switch is not turned ON in synchronization with the auto intake switch. Control of the auto intake switch is functional even when the A/C switch is turned OFF.
Setting 2	When the auto intake switch is ON, the A/C switch is also turned ON in synchronization with the auto intake switch. When the A/C switch is turned OFF, the auto intake switch is turned OFF in synchronization with the A/C switch.
Setting 3	Auto intake switch can be turned ON only when A/C switch is ON. When the A/C switch is turned OFF, the auto intake switch is turned OFF in synchronization with the A/C switch.

NOTE: When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of WORK SUPPORT may be cancelled.