DTC Confirmation Procedure
- PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always place ignition switch OFF and wait at least 10 seconds before conducting the next test.
GO TO 2.
- DTC REPRODUCTION PROCEDURE
CONSULT
- Start the engine.CAUTION: Never drive the vehicle.
- Turn the steering wheel from full left stop to full right stop.
- Return the steering wheel to the straight-ahead position.
- Select "Self Diagnostic Result" mode of "DAST 1".
Is DTC "C13A2-00" detected?
YES
Proceed to diagnosis procedure. Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: Inspection End.
- Start the engine.