DTC Confirmation Procedure

If DTC "C13AB-00" is displayed with DTC "C13A8-00", "C13A9-00", "C13AD-00" or "C13D4-00", first perform the confirmation procedure (trouble diagnosis) for DTC "C13AB-00".

Is applicable DTC detected?

YES

(C13A8-00 is detected). Refer to Diagnosis Procedure .

YES

(C13A9-00 is detected). Refer to Diagnosis Procedure .

YES

(C13AD-00 is detected). Refer to Diagnosis Procedure .

YES

(C13D4-00 is detected). Refer to Diagnosis Procedure .

NO

GO TO 2.

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always place ignition switch OFF and wait at least 10 seconds before conducting the next test.

GO TO 3.

CONSULT

1. Start the engine.
   CAUTION: Never drive the vehicle.
2. Select "Self Diagnostic Result" mode of "DAST 2".

Is DTC "C13AB-00" detected?

YES

Proceed to diagnosis procedure. Refer to Diagnosis Procedure .

NO

To check malfunction symptom before repair: Refer to Intermittent Incident .

NO

Confirmation after repair: Inspection End.