DTC Confirmation Procedure
- PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always place ignition switch OFF and wait at least 10 seconds before conducting the next test.
GO TO 2.
- DTC REPRODUCTION PROCEDURE
CONSULT
- Start the engine.CAUTION: Never drive the vehicle.
- Select "Self Diagnostic Result" MODE of "EPS/DAST 3".
Is DTC "C13E6-00" detected?
YES
Proceed to diagnosis procedure. Refer to Diagnosis Procedure .
NO
The temporary rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. Inspection End.
- Start the engine.