Work Procedure

When replacing ADAS control unit 2, it is necessary to write MAC key to ADAS control unit 2. Write MAC key to ADAS control unit 2 according to "MAC Key writing" procedure of "CONSULT Operation Manual".

CAUTION:

During MAC key writing, maintain the following conditions:

Ignition switch ON
CONSULT is connected to Internet

PERFORM MAC KEY WRITING
1. 1. Ignition switch ON.
  2. Select "MAC Key writing" on "Work Support" of "ICC/ADAS 2" using CONSULT.
  3. Touch "Write".
YES>>

WORK END