Work Procedure

1. CONSULT Perform writing vehicle specification to air bag diagnosis sensor unit following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual.
   NOTE:

   • Log in the network according to CONSULT guidance.
   • For details the network connection and operation, refer to "CONSULT Operation Manual".

>>

GO TO 2.

1. CONSULT
   1. Erase all ECU self-diagnosis results.
   2. Ignition switch OFF.
   3. Ignition switch ON.
   4. Check that all ECU self-diagnosis results have no DTC.

>>

Work End.