DTC Description
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN-High line, CAN-Low line) allowing a high rate of information transmission with less wiring. Each control unit communicate data but selectively reads required data only.
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC detected condition | |
|---|---|---|---|
| U1010-49 | CONTROL UNIT (CAN) [Control unit (CAN)] | Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | - | ||
| Threshold | Malfunction of EPS control unit during initial diagnosis | ||
| Diagnosis delay time | 3 times after malfunction is detected. | ||
POSSIBLE CAUSE
EPS control unit
FAIL-SAFE
Constant steering state