DTC Detection Logic

DTC No.

Trouble diagnosis name

(Trouble diagnosis content)

DTC detecting condition

Possible cause

P0335

CKP SEN/CIRCUIT

(Crankshaft position sensor circuit)

• The crankshaft position sensor signal is not detected by the ECM during the first few seconds of engine cranking.
• The proper pulse signal from the crankshaft position sensor is not sent to ECM while the engine is running.
• The crankshaft position sensor signal is not in the normal pattern during engine running.

• Harness or connectors

  (Crankshaft position sensor circuit is open or shorted.)

• Crankshaft position sensor
• Signal plate