DTC Diagnosis Procedure

1. Turn ignition switch ON and wait at least 1 second.
2. Turn ignition switch OFF and wait at least 10 seconds.
3. Repeat step 1 and 2 for 10 times.
4. Erase DTC.
5. Turn ignition switch OFF and wait at least 10 seconds
6. Turn ignition switch ON.
7. Check the DTC.

Is DTC erased?

YES>>

INSPECTION END

NO>>

GO TO 2.

1. Replace ECM. Refer to ECM : Removal and Installation .
2. Refer to Work Procedure .

>>

INSPECTION END