DTC Description
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN-H line, CAN-L line) allowing a high rate of information transmission with less wiring. Each control unit communicate data but selectively reads required data only.
DTC DETECTION LOGIC
| DTC | Display item | Malfunction detected condition |
|---|---|---|
| U1010-49 | CONTROL UNIT(CAN) | When detecting error during the initial diagnosis of CAN controller to steering angle main control module. |
POSSIBLE CAUSE
- Steering angle main control module internal error
FAIL-SAFE
Refer to Fail-safe .