Component Inspection

1. Turn ignition switch OFF.
2. Disconnect turbocharger boost sensor harness connector.
3. Check resistance between turbocharger boost sensor terminals as follows.

   Turbocharger boost sensor		Condition		Resistance (kΩ)
   +	-
   Terminal
   3	4	Temperature [°C (°F)]	25 (77)	1.80 - 2.20

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace turbocharger boost sensor (with intake air temperature sensor 2). Refer to CHARGE AIR COOLER : Exploded View .