DTC Description

DTC DETECTION LOGIC

DTC No.	CONSULT screen terms (Trouble diagnosis content)	DTC detected condition
C13B1-00	CONTROL MODULE (Control module)	Diagnosis condition	When engine running.
		Signal (terminal)	-
		Threshold	The internal malfunction is detected when control module is starting.
		Diagnosis delay time	1 second or more

POSSIBLE CAUSE

Steering force control module

FAIL-SAFE

Mode 2

NOTE:

For fail-safe mode, refer to Fail-safe .

DTC CONFIRMATION PROCEDURE

PRECONDITIONING
1. If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always place ignition switch OFF and wait at least 10 seconds before conducting the next test.
>>

GO TO 2.
DTC REPRODUCTION PROCEDURE
1. CONSULT
  1. Start the engine.
    CAUTION:
    Never drive the vehicle.
  2. Select "Self Diagnostic Result" mode of "EPS/DAST 3".
Is DTC "C13B1-00" detected?

YES>>

Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .

NO>>

To check malfunction symptom before repair: Refer to Intermittent Incident .

NO>>

Confirmation after repair: Inspection End.