Component Inspection

1. 1. Ignition switch OFF.
   2. Disconnect force motor angle sensor harness connector.
   3. Check continuity between motor angle sensor connector terminals.

      Force motor angle sensor		Continuity
      Terminals
      1	2	No
      1	4	No
      1	5	Yes
      1	6	No
      1	8	No
      2	4	No
      2	5	No
      2	6	Yes
      2	8	No
      4	5	No
      4	6	No
      4	8	Yes
      5	6	No
      5	8	No
      6	8	No

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Force motor angle sensor is malfunction. Replace steering column assembly. Refer to Removal and Installation .