Work Procedure

1. CONSULT Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to Description .
   NOTE: If "READ CONFIGURATION" cannot be used, use "MANUAL CONFIGURATION" after replacing around view monitor control unit.

>>

GO TO 2.

1. Replace around view monitor control unit. Refer to Removal and Installation .

>>

GO TO 3.

1. CONSULT ConfigurationPerform "WRITE CONFIGURATION - Config file" or "MANUAL CONFIGURATION" to write vehicle specification. Refer to Work Procedure .

>>

GO TO 4.

1. Perform calibration of camera image. Refer to Description .

>>

Work End.