Work Procedure

WRITING MODE SELECTION
1. CONSULT Select "CONFIGURATION" of AVM.
When writing saved data>>

GO TO 2.

When writing manually>>

GO TO 3
PERFORM "WRITE CONFIGURATION - Config file"
1. CONSULT Perform "WRITE CONFIGURATION - Config file".
>>

Work End.
PERFORM "MANUAL CONFIGURATION"
1. CONSULT Select "MANUAL CONFIGURATION" to write vehicle specifications into the around view monitor control unit.
  CAUTION:
  - Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnormal control of ECU.
  - Make sure to select "NEXT" even if the default settings displayed on the CONSULT are the desired settings. If "NEXT" is not selected, the configuration process will be incomplete.
  NOTE: If manual configuration items are not displayed, touch "NEXT".
>>

GO TO 4.
OPERATION CHECK
1. Confirm that each function controlled by around view monitor control unit operates normally.
>>

Work End.