Diagnosis Procedure
- ADJUST NEUTRAL POSITION OF STEERING ANGLE SENSOR
- Adjusts the steering angle sensor neutral position on ABS actuator and electrical unit (control unit) side. Refer to Work Procedure
.NOTE:
When B1383 is detected, adjust the predictive course line center position of the steering angle sensor.
>>
GO TO 2.
- Adjusts the steering angle sensor neutral position on ABS actuator and electrical unit (control unit) side. Refer to Work Procedure
.
- PERFORM DTC CONFIRMATION PROCEDURE AGAIN
- Perform DTC confirmation procedure again. Refer to DTC Confirmation Procedure .
Is DTC B1383-01 detected again?
YES>>
Replace steering angle sensor. Refer to Removal and Installation .
NO>>
Inspection End.