Component Inspection

1. 1. Ignition switch OFF.
   2. Disconnect main motor angle sensor connector.
   3. Check continuity between motor angle sensor connector terminals.

      Main motor angle sensor		Continuity
      Terminals
      1	2	No
      1	3	No
      1	4	No
      1	5	Yes
      1	6	No
      2	3	No
      2	4	Yes
      2	5	No
      2	6	No
      3	4	No
      3	5	No
      3	6	Yes
      4	5	No
      4	6	No
      5	6	No

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Main motor angle sensor is malfunctioning. Replace steering gear assembly. Refer to Removal and Installation .