DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms(Trouble diagnosis content) | DTC detected condition | |
|---|---|---|---|
| C13DF-00 | CONTROL MODULE(Control module) | Diagnosis condition | When engine running. |
| Signal (terminal) | - | ||
| Threshold | The internal malfunction in control module is detected. | ||
| Diagnosis delay time | 1 second or more | ||
POSSIBLE CAUSE
Steering angle main control module
FAIL-SAFE
- Mode 3 (When control module detects a malfunction at startup.)
- Mode 2 (When control module detects a malfunction except during startup.)NOTE:
For details of fail-safe mode, refer to Fail-safe .
DTC CONFIRMATION PROCEDURE
- PRECONDITIONING
- If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always place ignition switch OFF and wait at least 10 seconds before conducting the next test.
>>
GO TO 2.
- DTC REPRODUCTION PROCEDURE
CONSULT
- Start the engine.NOTE:
- Select "Self Diagnostic Result" mode of "DAST 1".
- Start the engine.
Is DTC "C13DF-00" detected?
YES>>
Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .
NO>>
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO>>
Confirmation after repair: Inspection End.