DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms(Trouble diagnosis content) | DTC detected condition | |
|---|---|---|---|
| C13E3-00 | SPIRAL CABLE PROTECTION(Spiral cable protection) | Diagnosis condition | When engine running |
| Signal (terminal) | - | ||
| Threshold | Spiral cable protection function is active by steering the steering wheel over the limit angle. | ||
| Diagnosis delay time | 1 seconds or more | ||
POSSIBLE CAUSE
- Steering the steering wheel over the limit angle
- Steering force control module
FAIL-SAFE
Protection mode
NOTE:
For details of protection mode, refer to Protection Function
.
DTC CONFIRMATION PROCEDURE
- PRECONDITIONING
- If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always place ignition switch OFF and wait at least 10 seconds before conducting the next test.
>>
GO TO 2.
- DTC REPRODUCTION PROCEDURE
CONSULT
- Start the engine.CAUTION:
Never drive the vehicle.
- Select "Self Diagnostic Result" mode of "EPS/DAST 3".
- Start the engine.
Is DTC "C13E3-00" detected?
YES>>
Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure .
NO>>
Spiral cable protection function is active temporarily by steering the steering wheel over the limit angle. This is not system malfunction.