LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2024 >> QX55 Essential >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission (DTC/Circuit Diagnosis) (2 Of 2) >> Shift (Electric Shift Control Module) >> P060C-00 Control Module Main Processor >> Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always ignition switch OFF and wait at least 10 seconds before conducting the next test.

    >>

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON and wait for 2 seconds or more.
    2. Turn ignition switch OFF and wait for 2 minutes or more.
    3. Turn ignition switch ON and wait for 2 seconds or more.
    4. Repeat step 2 and 3, three times.
    5. Check DTC.

    Is "P060C-00 detected?

    >>

    Go to DTC Diagnosis Procedure .

    >>

    To check malfunction symptom before repair: Refer to Intermittent Incident .

    >>

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals